New Technique Makes Tissues Transparent

Daily Science Journal (Feb. 13, 2008) — If humans had see-through skin like a jellyfish, spotting disease like cancer would be a snap: Just look, and see a tumor form or grow.

Diagram of chicken breast tissue (approximately 250 microns thick) with photo-refractive crystal to counteract the scattering of light and remove the distortion it creates in images. The lower diagram would show the clearest image. (Credit: Caltech Biophotonics Laboratory)

But humans, of course, are not remotely diaphanous. "The reason a person is not transparent is that their tissues are highly scattering," sending light waves careening through the tissue instead of straight through, as they would through the tissue of that jellyfish, explains Changhuei Yang of the California Institute of Technology.

This scattering, in addition to rendering all of us opaque, makes the detection of disease a much trickier issue, requiring a host of diagnostic tests and procedures. But not, perhaps, for much longer, thanks to a new optical trick developed by Yang, an assistant professor of electrical engineering and bioengineering, and his colleagues, that counteracts the scattering of light and removes the distortion it creates in images.

It is well known that light scattering in a material is not exactly the random and unpredictable process one might imagine. In fact, scattering is deterministic, which means that the path that a beam of light takes as it traverses a particular slice of tissue and bounces and rebounds off of individual cells, is entirely predictable; if you again bounce light through that same swath of cells, it will scatter in exactly the same way.

The process is even reversible; if the individual photons of light that scattered through the tissue could be collected and sent back through the tissue, they'd bounce back along the same path and converge at the original spot from which they were sent. "The process is similar to the scattering of billiard balls on a pool table. If you can precisely reverse the paths and velocities of the billiard balls, you can cause the billiard balls to reassemble themselves into a rack," Yang explains.

Yang, along with his colleagues at Caltech, École Polytechnique Fédérale de Lausanne in Switzerland, and MIT, exploited this phenomenon to offset the murky nature of our tissues.

Their technique, called turbidity suppression by optical phase conjugation (TSOPC), is surprisingly simple. The scientists used a holographic crystal to record the scattered light pattern emerging from a 0.46-mm-thick piece of chicken breast. They then holographically played the pattern back through the tissue section to recover the original light beam. "This is similar to grabbing hold of the direction of time flow and turning it around; the time-reversed photons must retrace their trajectories through the tissue," Yang says. "The task is formidable though, as this is comparable to starting with a rack of 10 to the 18th power billiard balls (or photons), scattering them around the table, and attempting to reassemble them into a rack."

"Until we did this study, it wasn't clear that the effect will be observable with biological tissues. We were pleasantly surprised that the effect was readily observable and remarkably robust," Yang says. "This study opens up numerous possibilities in the use of optical time reversal in biomedicine."

One possible use of the technique is in photodynamic therapy, in which a highly focused beam of light is aimed at cancerous cells that have absorbed cell-killing light-sensitive compounds. When the light hits the cells, the compounds are activated and destroy the cells. Photodynamic therapy is most effective in treating cancers on the skin surface. Yang's technique, however, offers a way to concentrate light onto cancer-killing compounds located more deeply within tissue.

Yang's idea is to inject strongly light-scattering particles that are coated with light-activated cancer-killing drugs into diseased tissue. Shine a beam of light into the tissue, and it would be reflected off the scattering compounds as it bounces through the tissue. Some of the scattered light would return to the source, where it could be recorded as a hologram.

This hologram would contain information about the path that the scattered light took through the tissue, and, in effect, describe the optimal path BACK toward the light-scattering molecule--and the cancer-killing compounds. Playing back the signal with a stronger burst of light will then activate the therapeutic drugs, which kill the cancer cells.

In addition, the technique could offer a way to power miniature implants buried deep within tissues. "If you take a quick survey of what is out there at present, you will see that implants are fairly large," Yang says. "For example, a pacemaker is about the size of a cell phone. Why are they so big? A large part of the reason is because they need to carry their own power sources."

The key to making smaller implants, then--say, the size of a pen tip--is to eliminate the power sources. "I think implants that carry photovoltaic receivers are particularly promising," he says. "The effect can be applied to tailor light-delivery mechanisms to efficiently channel light into tissues and onto these implants."

A study describing the process appears in the February issue of the journal Nature Photonics. Zahid Yaqoob, a postdoctoral fellow in electrical engineering at Caltech, performed most of the experiments reported in the paper. The other authors of the paper are Demetri Psaltis, professor of optics and dean of engineering, École Polytechnique Fédérale de Lausanne in Switzerland, and Michael S. Feld, a professor of physics at MIT.

Adapted from materials provided by California Institute of Technology.

Read the rest of this entry »

Device Zeroes In On Small Breast Tumors

Daily Science Journal (Jan. 31, 2008) — A new medical imager for detecting and guiding the biopsy of suspicious breast cancer lesions is capable of spotting tumors that are half the size of the smallest ones detected by standard imaging systems, according to a new study.

The results of initial testing of the PEM/PET system, designed and constructed by scientists at the Department of Energy's Thomas Jefferson National Accelerator Facility, West Virginia University School of Medicine and the University of Maryland School of Medicine will be published in the journal Physics in Medicine and Biology on Feb. 7.

"This is the most-important and most-difficult imager we've developed so far," Stan Majewski, Jefferson Lab Radiation Detector and Medical Imaging Group leader said. "It is another example of nuclear physics detector technology that we have put a lot of time and effort into adapting for the common good."

Testing of the new imager was led by Ray Raylman, a professor of radiology and vice chair of Radiology Research at WVU and lead author on the study. Raylman's team imaged various radioactive sources to test the resolution of the system.

"We had good performance characteristics, with image resolution below two millimeters. In regular PET, the image resolution is over five millimeters, so we're quite a bit better than that," Raylman said. In addition, the initial tests revealed that the PEM/PET system can complete an image and biopsy in about the same amount of time as a traditional biopsy.

"The ability of the device to do biopsy is probably one of its most unique characteristics. There are other breast imagers, but none that are built specifically to do biopsy as well as imaging," Raylman said.

The system features components designed for imaging the unique contours of the breast. Known as positron emission mammography (PEM), this imaging capability enables users to attain high-resolution, three-dimensional PET images of the breast. The PEM/PET system images the breast with a movable array of two pairs of two flat detection heads.

If a suspected lesion is found, a single pair of heads is then used to guide a needle biopsy of the lesion; the biopsy is performed with a person-controlled robot arm. Raylman is the author of the concept and has a patent on this idea. The system is especially useful in imaging tumors in women who have indeterminate mammograms because of dense or fibroglandular breasts.

The Jefferson Lab Radiation Detector and Medical Imaging Group, with a group member now affiliated with the University of Maryland School of Medicine, developed the detector heads with the on-board electronics, the data acquisition readout and the image reconstruction software. The imaging device's gantry and the motion-control software was developed by West Virginia University researchers.

The next steps for the team include minor improvements in the detector systems and image reconstruction software and the addition of components for taking x-ray computed tomography (CT) scans. Initial clinical trials are planned after completion of system testing.

Adapted from materials provided by DOE/Thomas Jefferson National Accelerator Facility.

Read the rest of this entry »

Cell Phone Sensors Detect Radiation To Thwart Nuclear Terrorism

Daily Science Journal (Jan. 29, 2008) — Researchers at Purdue University are working with the state of Indiana to develop a system that would use a network of cell phones to detect and track radiation to help prevent terrorist attacks with radiological "dirty bombs" and nuclear weapons.

Purdue physics professor Ephraim Fischbach, at right, and nuclear engineer Jere Jenkins review radiation-tracking data as part of research to develop a system that would use a network of cell phones to detect and track radiation. Such a system could help prevent terrorist attacks with radiological "dirty bombs" and nuclear weapons by blanketing the nation with millions of cell phones equipped with radiation sensors able to detect even light residues of radioactive material. Because cell phones already contain global positioning locators, the network of phones would serve as a tracking system. (Credit: Purdue News Service photo/David Umberger)

Such a system could blanket the nation with millions of cell phones equipped with radiation sensors able to detect even light residues of radioactive material. Because cell phones already contain global positioning locators, the network of phones would serve as a tracking system, said physics professor Ephraim Fischbach. Fischbach is working with Jere Jenkins, director of Purdue's radiation laboratories within the School of Nuclear Engineering.

"It's the ubiquitous nature of cell phones and other portable electronic devices that give this system its power," Fischbach said. "It's meant to be small, cheap and eventually built into laptops, personal digital assistants and cell phones."

The system was developed by Andrew Longman, a consulting instrumentation scientist. Longman developed the software for the system and then worked with Purdue researchers to integrate the software with radiation detectors and cell phones. Cellular data air time was provided by AT&T.

The research has been funded by the Indiana Department of Transportation through the Joint Transportation Research Program and School of Civil Engineering at Purdue.

"The likely targets of a potential terrorist attack would be big cities with concentrated populations, and a system like this would make it very difficult for someone to go undetected with a radiological dirty bomb in such an area," said Longman, who also is Purdue alumnus. "The more people are walking around with cell phones and PDAs, the easier it would be to detect and catch the perpetrator. We are asking the public to push for this."

Tiny solid-state radiation sensors are commercially available. The detection system would require additional circuitry and would not add significant bulk to portable electronic products, Fischbach said.

The technology is unlike any other system, particularly because the software can work with a variety of sensor types, he said.

"Cell phones today also function as Internet computers that can report their locations and data to their towers in real time," Fischbach said. "So this system would use the same process to send an extra signal to a home station. The software can uncover information from this data and evaluate the levels of radiation."

The researchers tested the system in November, demonstrating that it is capable of detecting a weak radiation source 15 feet from the sensors.

"We set up a test source on campus, and people randomly walked around carrying these detectors," Jenkins said. "The test was extremely safe because we used a very weak, sealed radiation source, and we went through all of the necessary approval processes required for radiological safety. This was a source much weaker than you would see with a radiological dirty bomb."

Officials from the Indiana Department of Transportation participated in the test.

"The threat from a radiological dirty bomb is significant, especially in metropolitan areas that have dense populations," said Barry Partridge, director of INDOT's Division of Research and Development.

Long before the sensors would detect significant radiation, the system would send data to a receiving center.

"The sensors don't really perform the detection task individually," Fischbach said. "The collective action of the sensors, combined with the software analysis, detects the source. The system would transmit signals to a data center, and the data center would transmit information to authorities without alerting the person carrying the phone. Say a car is transporting radioactive material for a bomb, and that car is driving down Meridian Street in Indianapolis or Fifth Avenue in New York. As the car passes people, their cell phones individually would send signals to a command center, allowing authorities to track the source."

The signal grows weaker with increasing distance from the source, and the software is able to use the data from many cell phones to pinpoint the location of the radiation source.

"So the system would know that you were getting closer or farther from something hot," Jenkins said. "If I had handled radioactive material and you were sitting near me at a restaurant, this system would be sensitive enough to detect the residue. "

The Purdue Research Foundation owns patents associated with the technology licensed through the Office of Technology Commercialization.

In addition to detecting radiological dirty bombs designed to scatter hazardous radioactive materials over an area, the system also could be used to detect nuclear weapons, which create a nuclear chain reaction that causes a powerful explosion. The system also could be used to detect spills of radioactive materials.

"It's impossible to completely shield a weapon's radioactive material without making the device too heavy to transport," Jenkins said.

The system could be trained to ignore known radiation sources, such as hospitals, and radiation from certain common items, such as bananas, which contain a radioactive isotope of potassium.

"The radiological dirty bomb or a suitcase nuclear weapon is going to give off higher levels of radiation than those background sources," Fischbach said. "The system would be sensitive enough to detect these tiny levels of radiation, but it would be smart enough to discern which sources posed potential threats and which are harmless."

The team is working with Karen White, senior technology manager at the Purdue Research Foundation, to commercialize the system. For more information on licensing the cell phone sensor technology, contact White at (765) 494-2609

Adapted from materials provided by Purdue University.

Read the rest of this entry »

Integrated Receiver For High Frequency Applications On A Tiny Chip

Daily Science Journal (Dec. 31, 2007) — Researchers at Chalmers University in Sweden have succeeded in combining a receiver for high frequencies with an antenna on a small chip.

The receiver is just a few square millimetre and is suitable for new safety systems, image sensors, and radio communication for high bitrates. The receiver is an electronic circuit including antenna, low noise amplifier, and frequency converter monolithically integrated on gallium arsenide.

"This is a breakthrough in our research. Our result opens the possibility to manufacture systems for very high frequencies within the so called 'THZ-electronics' area, to a relatively low cost. In the next phase of this project even more functions can be integrated on the same chip", according to Herbert Zirath, professor at the department of Microwave Electronics.

This circuit can be used, for instance, in radiometer systems in future safety systems looking for concealed weapons without personal intrusive search. Other applications for this circuit are imaging sensors that can look through darkness, smoke or fog. This is an important safety function for vehicles such as cars and aircrafts.

"Thanks to this technology, we now have the possibility of integrating imaging sensors by using circuits of a few square millimetre which is much smaller that the present technology at a lower cost. For automotive applications such as cars, aircrafts and satellites, the size and weight is of utmost importance. The present systems consist of many pieces and demands several cubic decimetres volume", says Herbert Zirath.

The new circuit is designed to work at the frequency of 220 gigahertz, but this is not an upper limit. According to professor Zirath, the technology can be used up to and above 300GHz in a near future.

The technology is also interesting for wireless data communication because, due to the very high bandwidth, data rate well above 10 Gbit/s is possible to realize in future radio links. Together with Omnisys Instruments in Gothenburg, we are also implementing receivers for future earth observation satellites for environmental studies and weather forecasts at frequencies 118 and 183 GHz, using the same technology.

This work is the results of a co-operation between Chalmers, Saab Microwave Systems, Omnisys Instruments AB, FOI, The Fraunhofer Institute IAF in Freiburg and FGAN, Germany, within the project "nanoComp".

Adapted from materials provided by Chalmers University.

Read the rest of this entry »

Radio Waves Fire Up Nanotubes Embedded In Tumors, Destroying Liver Cancer

Daily Science Journal (Nov. 3, 2007) — Cancer cells treated with carbon nanotubes can be destroyed by non-invasive radio waves that heat up the nanotubes while sparing untreated tissue, a research team led by scientists at The University of Texas M. D. Anderson Cancer Center and Rice University has shown in preclinical experiments.

Researchers show that the technique completely destroyed liver cancer tumors in rabbits. There were no side effects noted. However, some healthy liver tissue within 2-5 millimeters of the tumors sustained heat damage due to nanotube leakage from the tumor.

"These are promising, even exciting, preclinical results in this liver cancer model," says senior author Steven Curley, M.D., professor in M. D. Anderson's Department of Surgical Oncology. "Our next step is to look at ways to more precisely target the nanotubes so they attach to, and are taken up by, cancer cells while avoiding normal tissue."

Targeting the nanotubes solely to cancer cells is the major challenge in advancing the therapy, Curley says. Research is under way to bind the nanotubes to antibodies, peptides or other agents that in turn target molecules expressed on cancer cells. To complicate matters, most such molecules also are expressed in normal tissue.

Curley estimates that a clinical trial is at least three to four years away.

Curley conducted the research at M. D. Anderson in collaboration with nanotechnology experts at Rice University and with Erie, Pennsylvania, entrepreneur John Kanzius of ThermMed LLC, who invented the experimental radiofrequency generator used in the experiments. Kanzius is a cancer survivor and former radio station owner whose insights into the potential of targeted radio waves inspired this line of research.

At Rice, the work was begun by Nobel laureate Richard Smalley, several months before his untimely death from cancer in October 2005. Smalley was the founder of Rice's Carbon Nanotechnology Laboratory and one of the world's foremost experts on carbon nanotubes. He shared the Nobel Prize for the 1985 discovery of fullerenes, the family of carbon molecules that includes nanotubes. His research in 2005 was concentrated largely on the radiofrequency cancer research project.

Rice materials scientist professor Boris Yakobson, Ph.D., a co-author on the paper, recalled meeting with Smalley in his hospital room at M. D. Anderson five days before his death.

"He looked very ill, breathing heavily through the oxygen mask, but all he wanted to do was talk about the physics of this very phenomenon," Yakobson said. "Oblivious of his ebbing health, Rick was focused in the future. He had told Congress in 1999 that nanotechnology would help revolutionize cancer treatment, and he was a scientist wanting to know whether this technology might be one of the things that would make that possible."

In the liver cancer experiment, a solution of single-walled carbon nanotubes was injected directly into the tumors. Four treated rabbits were then exposed to two minutes of radiofrequency treatment, resulting in thermal destruction of their tumors.

Carbon nanotubes are hollow cylinders of pure carbon that measure about a billionth of a meter, or one nanometer, across.

Control group tumors that were treated only by radiofrequency exposure or only by nanotubes were undamaged.

In lab experiments, two lines of liver cancer cells and one pancreatic cancer cell line were destroyed after being incubated with nanotubes and exposed to the radiofrequency field.

"I'm humbled by the results of this research," says Kanzius. "I realize it's early in the race, but Dr. Curley and his team have moved on this carefully with utmost speed. I look forward to continuing to work with them and hopefully to watching the first person be treated with this procedure. The race isn't over but it needs to be taken to the finish line."

Radiofrequency energy fields penetrate deeply into tissue, so it would be possible to deliver heat anywhere in the body if targeted nanotubes or other nanoparticles can be delivered to cancerous cells, Curley says. Without such a target, radio waves will pass harmlessly through the body.

An invasive technique known as radio frequency ablation is used to treat some malignant tumors, the authors note. It requires insertion of needle electrodes directly into the tumors. ncomplete tumor destruction occurs in 5 to 40 percent of cases, normal tissue is damaged and complications arise in 10 percent of patients who suffer such damage. Radiofrequency ablation is limited to liver, kidney, breast, lung and bone cancers.

This research appeared online ahead of December publication in the journal Cancer.

The research was supported by an American Association of Cancer Research Littlefield Grant, NASA and the Houston-based Alliance for NanoHealth, the National Science Foundation, the Center for Biological and Environmental Nanotechnology and the Fulbright Foundation.

Co-authors with Curley, Smalley, Kanzius and Yakobson are first authors Christopher J. Gannon, M.D., also of M. D. Anderson's Department of Surgical Oncology, and Paul Cherukuri, Ph.D. of Rice's Carbon Nanotechnology Laboratory and Department of Chemistry; Carter Kittrell, Ph.D., R. Bruce Weisman, Ph.D., Matteo Pasquali, Ph.D., and Howard K. Schmidt, Ph.D., all of Rice; and Laurent Cognet, Ph.D., of Rice and the Centre de Physique Moléculaire Optique et Hertzienne, Université Bordeaux, France.

Adapted from materials provided by University of Texas M. D. Anderson Cancer Center.

Read the rest of this entry »

First Fully-functional Radio From A Single Carbon Nanotube Created

Daily Science Journal (Oct. 31, 2007) — Make way for the real nanopod and make room in the Guinness World Records. A team of researchers with the U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) and the University of California at Berkeley have created the first fully functional radio from a single carbon nanotube, which makes it by several orders of magnitude the smallest radio ever made.

This image, taken by a transmission electron microscope, shows a single carbon nanotube protruding from an electrode. This nanotube is less than a micron long and only 10 nanometers wide, or 10,000 times thinner than the width of a single human hair. When a radio wave of a specific frequency impinges on the nanotube, it begins to vibrate vigorously. An electric field applied to the nanotube forces electrons to be emitted from its tip. This electrical current may be used to detect the mechanical vibrations of the nanotube, and thus listen to the radio waves. (The waves shown in this image were added for visual effect, and are not part of the original microscope image.) (Credit: Courtesy Zettl Research Group, Lawrence Berkeley National Laboratory and University of California at Berkeley)

Wielding a single carbon nanotube 10,000 times smaller than a human hair, this is definitely the smallest radio yet. The nanotube vibrates at radio frequencies to receive the signal, then acts as both amplifier and demodulator. With only a battery and sensitive earphones, it can pick up AM or FM. With such a small receiver or transmitter, you could put a tracking collar on a bacterium.

“A single carbon nanotube molecule serves simultaneously as all essential components of a radio — antenna, tunable band-pass filter, amplifier, and demodulator,” said physicist Alex Zettl, who led the invention of the nanotube radio. “Using carrier waves in the commercially relevant 40-400 MHz range and both frequency and amplitude modulation (FM and AM), we were able to demonstrate successful music and voice reception.”

Given that the nanotube radio essentially assembles itself and can be easily tuned to a desired frequency band after fabrication, Zettl believes that nanoradios will be relatively easy to mass-produce. Potential applications, in addition to incredibly tiny radio receivers, include a new generation of wireless communication devices and monitors. Nanotube radio technology could prove especially valuable for biological and medical applications.

“The entire radio would easily fit inside a living cell, and this small size allows it to safely interact with biological systems,” Zettl said. “One can envision interfaces with brain or muscle functions, or radio-controlled devices moving through the bloodstream.”

It is also possible that the nanotube radio could be implanted in the inner ear as an entirely new and discrete way of transmitting information, or as a radically new method of correcting impaired hearing.

Zettl holds joint appointments with Berkeley Lab's Materials Sciences Division (MSD) and the UC Berkeley Physics Department where he is the director of the Center of Integrated Nanomechanical Systems. In recent years, he and his research group have created an astonishing array of devices out of carbon nanotubes - hollow tubular macromolecules only a few nanometers (billionths of a meter) in diameter and typically less than a micron in length – including sensors, diodes and even a motor. The nanotube radio, however, is the first that – literally – rocks!

“When I was a young kid, I got a transistor radio as a gift and it was the greatest thing I could imagine - music coming from a box I could hold in my hand!” Zettl said. “When we first played our nanoradio, I was just as excited as I was when I first turned on that transistor radio as a kid.”

The carbon nanotube radio consists of an individual carbon nanotube mounted to an electrode in close proximity to a counter-electrode, with a DC voltage source, such as from a battery or a solar cell array, connected to the electrodes for power. The applied DC bias creates a negative electrical charge on the tip of the nanotube, sensitizing it to oscillating electric fields. Both the electrodes and nanotube are contained in vacuum, in a geometrical configuration similar to that of a conventional vacuum tube.

Kenneth Jensen, a graduate student in Zettl’s research group, did the actual design and construction of the radio.

“We started out by making an exceptionally sensitive force sensor,” Jensen said.“Nanotubes are like tiny cat whiskers.Small forces, on the order of attonewtons, cause them to deflect a significant amount.By detecting this deflection, you can infer what force was acting on the nanotube. This incredible sensitivity becomes even greater at the nanotube’s flexural resonance frequency, which falls within the frequencies of radio broadcasts, cell phones and GPS broadcasting. Because of this high resonance frequency, Alex (Zettl) suggested that nanotubes could be used to make a radio.”

Although it has the same essential components, the nanotube radio does not work like a conventional radio. Rather than the entirely electrical operation of a conventional radio, the nanotube radio is in part a mechanical operation, with the nanotube itself serving as both antenna and tuner.

Incoming radio waves interact with the nanotube’s electrically charged tip, causing the nanotube to vibrate. These vibrations are only significant when the frequency of the incoming wave coincides with the nanotube’s flexural resonance frequency, which, like a conventional radio, can be tuned during operation to receive only a pre-selected segment, or channel, of the electromagnetic spectrum.

Amplification and demodulation properties arise from the needle-point geometry of carbon nanotubes, which gives them unique field emission properties. By concentrating the electric field of the DC bias voltage applied across the electrodes, the nanotube radio produces a field-emission current that is sensitive to the nanotube’s mechanical vibrations. Since the field-emission current is generated by the external power source, amplification of the radio signal is possible. Furthermore, since field emission is a non-linear process, it also acts to demodulate an AM or FM radio signal, just like the diode used in traditional radios.

“What we see then is that all four essential components of a radio receiver are compactly and efficiently implemented within the vibrating and field-emitting carbon nanotube,” said Zettl. “This is a totally different approach to making a radio - the exploitation of electro-mechanical movement for multiple functions. In other words, our nanotube radio is a true NEMS (nano-electro-mechanical system) device.”

Because carbon nanotubes are so much smaller than the wavelengths of visible light, they cannot be viewed with even the highest powered optical microscope. Therefore, to observe the critical mechanical motionof their nanotube radio, Zettl and his research team, which in addition to Jensen, also included post-doc Jeff Weldon and graduate student Henry Garcia, mounted their nanotube radio inside a high resolution transmission electron microscope (TEM). A sine-wave carrier radio signal was launched from a nearby transmitting antenna and when the frequencies of the transmitted carrier wave matched the nanotube resonance frequency, radio reception became possible.

“To correlate the mechanical motions of the nanotube to an actual radio receiver operation, we launched an FM radio transmission of the song Good Vibrations by the Beach Boys,” said Zettl. “After being received, filtered, amplified, and demodulated all by the nanotube radio, the emerging signal was further amplified by a current preamplifier, sent to an audio loudspeaker and recorded. The nanotube radio faithfully reproduced the audio signal, and the song was easily recognizable by ear.”

When the researchers deliberately detuned the nanotube radio from the carrier frequency, mechanical vibrations faded and radio reception was lost. A “lock” on a given radio transmission channel could be maintained for many minutes at a time, and it was not necessary to operate the nanotube radio inside a TEM. Using a slightly different configuration, the researchers successfully transmitted and received signals across a distance of several meters.

“The integration of all the electronic components of a radio happened naturally in the nanotube itself,” said Jensen. “Within a few hours of figuring out that our force sensor was in fact a radio, we were playing music!”

Added Zettl, “Our nanotube radio is sophisticated and elegant in the physics of its operation, but sheer simplicity in technical design. Everything about it works perfectly, without additional patches or tricks.”

Berkeley Lab’s Technology Transfer Department is now seeking industrial partners to further develop and commercialize this technology.

A paper on this work is now on-line at the Nano Letters Website. It will also be published in the November 2007 print edition of Nano Letters. The paper is entitled “Nanotube Radio” and the co-authors are Zettl, Jensen, Weldon and Garcia. In that same print edition, there appears a paper by Peter Burke and Chris Rutherglen of UC Irvine, reporting on the use of a carbon nanotube as a demodulator.

The nanotube radio research was supported by the U.S. Department of Energy and by the National Science Foundation within the Center of Integrated Nanomechanical Systems.

Berkeley Lab is a U.S. Department of Energy national laboratory located in Berkeley, California. It conducts unclassified scientific research and is managed by the University of California.

Adapted from materials provided by DOE/Lawrence Berkeley National Laboratory.

Read the rest of this entry »

You Thought Your Nano Was Small: Nano-sized Detector Turns Radio Waves Into Music

Daily Science Journal (Oct. 19, 2007) — Researchers in California report development of the world's first working radio system that receives radio waves wirelessly and converts them to sound signals through a nano-sized detector made of carbon nanotubes.

The "carbon nanotube radio" device is thousands of times smaller than the diameter of a human hair. The development marks an important step in the evolution of nano-electronics and could lead to the production of the world's smallest radio, the scientists say.

Peter Burke and Chris Rutherglen developed a carbon nanotube "demodulator" that is capable of translating AM radio waves into sound. In a laboratory demonstration, the researchers incorporated the detector into a complete radio system and used it to successfully transmit classical music wirelessly from an iPod to a speaker several feet away from the music player.

Although other researchers have developed nano-sized radio wave detectors in the past, the current study marks the first time that a nano-sized detector has been demonstrated in an actual working radio system, the scientists say. The study demonstrates the feasibility of making other radio components at the nanoscale in the future and may eventually lead to a "truly integrated nanoscale wireless communications system," they say. Such a device could have numerous industrial, commercial, medical and other applications.

Their findings appeared online October 17 and are scheduled for publication in the Nov. 14 print edition of ACS' Nano Letters.

Adapted from materials provided by American Chemical Society, via EurekAlert!, a service of AAAS.

Read the rest of this entry »