New Technique Makes Tissues Transparent

Daily Science Journal (Feb. 13, 2008) — If humans had see-through skin like a jellyfish, spotting disease like cancer would be a snap: Just look, and see a tumor form or grow.

Diagram of chicken breast tissue (approximately 250 microns thick) with photo-refractive crystal to counteract the scattering of light and remove the distortion it creates in images. The lower diagram would show the clearest image. (Credit: Caltech Biophotonics Laboratory)

But humans, of course, are not remotely diaphanous. "The reason a person is not transparent is that their tissues are highly scattering," sending light waves careening through the tissue instead of straight through, as they would through the tissue of that jellyfish, explains Changhuei Yang of the California Institute of Technology.

This scattering, in addition to rendering all of us opaque, makes the detection of disease a much trickier issue, requiring a host of diagnostic tests and procedures. But not, perhaps, for much longer, thanks to a new optical trick developed by Yang, an assistant professor of electrical engineering and bioengineering, and his colleagues, that counteracts the scattering of light and removes the distortion it creates in images.

It is well known that light scattering in a material is not exactly the random and unpredictable process one might imagine. In fact, scattering is deterministic, which means that the path that a beam of light takes as it traverses a particular slice of tissue and bounces and rebounds off of individual cells, is entirely predictable; if you again bounce light through that same swath of cells, it will scatter in exactly the same way.

The process is even reversible; if the individual photons of light that scattered through the tissue could be collected and sent back through the tissue, they'd bounce back along the same path and converge at the original spot from which they were sent. "The process is similar to the scattering of billiard balls on a pool table. If you can precisely reverse the paths and velocities of the billiard balls, you can cause the billiard balls to reassemble themselves into a rack," Yang explains.

Yang, along with his colleagues at Caltech, École Polytechnique Fédérale de Lausanne in Switzerland, and MIT, exploited this phenomenon to offset the murky nature of our tissues.

Their technique, called turbidity suppression by optical phase conjugation (TSOPC), is surprisingly simple. The scientists used a holographic crystal to record the scattered light pattern emerging from a 0.46-mm-thick piece of chicken breast. They then holographically played the pattern back through the tissue section to recover the original light beam. "This is similar to grabbing hold of the direction of time flow and turning it around; the time-reversed photons must retrace their trajectories through the tissue," Yang says. "The task is formidable though, as this is comparable to starting with a rack of 10 to the 18th power billiard balls (or photons), scattering them around the table, and attempting to reassemble them into a rack."

"Until we did this study, it wasn't clear that the effect will be observable with biological tissues. We were pleasantly surprised that the effect was readily observable and remarkably robust," Yang says. "This study opens up numerous possibilities in the use of optical time reversal in biomedicine."

One possible use of the technique is in photodynamic therapy, in which a highly focused beam of light is aimed at cancerous cells that have absorbed cell-killing light-sensitive compounds. When the light hits the cells, the compounds are activated and destroy the cells. Photodynamic therapy is most effective in treating cancers on the skin surface. Yang's technique, however, offers a way to concentrate light onto cancer-killing compounds located more deeply within tissue.

Yang's idea is to inject strongly light-scattering particles that are coated with light-activated cancer-killing drugs into diseased tissue. Shine a beam of light into the tissue, and it would be reflected off the scattering compounds as it bounces through the tissue. Some of the scattered light would return to the source, where it could be recorded as a hologram.

This hologram would contain information about the path that the scattered light took through the tissue, and, in effect, describe the optimal path BACK toward the light-scattering molecule--and the cancer-killing compounds. Playing back the signal with a stronger burst of light will then activate the therapeutic drugs, which kill the cancer cells.

In addition, the technique could offer a way to power miniature implants buried deep within tissues. "If you take a quick survey of what is out there at present, you will see that implants are fairly large," Yang says. "For example, a pacemaker is about the size of a cell phone. Why are they so big? A large part of the reason is because they need to carry their own power sources."

The key to making smaller implants, then--say, the size of a pen tip--is to eliminate the power sources. "I think implants that carry photovoltaic receivers are particularly promising," he says. "The effect can be applied to tailor light-delivery mechanisms to efficiently channel light into tissues and onto these implants."

A study describing the process appears in the February issue of the journal Nature Photonics. Zahid Yaqoob, a postdoctoral fellow in electrical engineering at Caltech, performed most of the experiments reported in the paper. The other authors of the paper are Demetri Psaltis, professor of optics and dean of engineering, École Polytechnique Fédérale de Lausanne in Switzerland, and Michael S. Feld, a professor of physics at MIT.

Adapted from materials provided by California Institute of Technology.

Read the rest of this entry »

Using Musical Chords To Analyze And Illustrate Hydrogen Molecule's Response To Laser Pulses

Daily Science Journal (Feb. 10, 2008) — For Kansas State University physics professor Uwe Thumm, confirmation of a theory about the behavior of small molecules became music to his ears -- literally. He and colleagues in Heidelberg, Germany, have shown how a hydrogen molecule responds to laser pulses by using the changing musical chord created by the molecule's vibrational motion.

Researchers in Heidelberg visualized the development over time of molecular resonance. The distance between the two nuclei (R) in the heavy hydrogen (deuterium) ion D2+ is plotted against the time. After approximately 100 femtoseconds, the wave packet, i.e. the location of the nuclei, starts to become hazy, after 400 femtoseconds there is a "revival" and the wave packet is put back together again. (Credit: Max Planck Institute for Nuclear Physics)

Thumm is a member of K-State's J.R. Macdonald Laboratory, where he is among several researchers who work on the properties and behavior of atoms and small molecules.

For decades, researchers had used the Macdonald Laboratory to make atoms and molecules collide with particles. Thumm said much of what scientists know about atoms and molecules is based on such collision experiments. To predict and explain what happens in these collisions, a large group of experimental physicists works closely with Thumm and two other theorists. The theorists use computers, make models and crunch numbers with the hope of producing results that are compatible with what experiments show.

Thanks to improvements in laser technology, around 1999 the Macdonald Laboratory researchers realized that they could transfer a lot of their expertise in atomic collisions to study in detail what happens when atoms and molecules get irradiated by very intense laser light. The new laser systems in the laboratory offer some advantages over the big particle accelerators, Thumm said. The laser pulses offer more control and can be made so short that the researchers now routinely observe the motion of nuclei inside small molecules in time. In addition, the laser pulses' peak intensity is enormous and would equal all of the sun's light focused onto a small spot of the size of a postage stamp or smaller.

Motivated by these opportunities, Thumm and his colleagues became curious about figuring out what would happen if the smallest and simplest molecule, hydrogen, were exposed to such ultra short and intense laser pulses. Together with his postdoctoral collaborator Bernold Feuerstein, Thumm developed a model and did calculations to determine how laser pulses influence the motion of the two protons in the hydrogen molecule.

"The short answer is that the laser pulse either makes the molecules vibrate more violently or blows them apart," Thumm said. He said this wasn't surprising because in the hydrogen molecule, two protons are connected by two electrons that function like a spring. When hit with the laser pulses, the protons oscillate back and forth.

Although this model may be easy to imagine on a large scale, Thumm said particles behave differently at the quantum level. This means that determining the locations of these oscillating protons isn't easy. Thumm described determining the protons' movements after being hit with the laser like what happens if you drop a marble in a bathtub. Looking at the circular ripples of water in the center of the tub, it's pretty easy to tell where the marble was dropped in. But when those ripples bounce off the sides of the tub, the wave pattern changes shape, and it becomes harder to tell where the marble was dropped. The wave gets delocalized. Thumm said the same thing happens to the protons not in a matter of seconds, but in a matter of femtoseconds -- that's a billionth of a millionth of a second. After about 60 femtoseconds, it's impossible to tell where the protons are.

"You quickly loose track of what the distance between the two protons is," Thumm said." All you can say is that they have a certain likelihood of being at a certain distance. This is in agreement with the bathtub experiment: Seconds after the marble was dropped, you can't tell where exactly it plunged in."

But things work differently at the quantum level, and the researchers were surprised that about 600 femtoseconds after being hit with the laser, the distance between the protons again becomes well defined. "We call this a revival of the original motion of the protons," Thumm said. "It's not going to happen in the bathtub, but it happens at the quantum level."

Thumm and Feuerstein published their theoretical prediction in 2003. Thumm said that they were pleasantly surprised when experiments at the Max-Planck Institute in Heidelberg, Germany, in 2006 confirmed the revival described in their model. "The agreement between the new experiments and our model was almost perfect and exceeded our expectations," Thumm said.

Feuerstein had since moved to Heidelberg, where he and his group of researchers continued to collaborate with Thumm's group at K-State. Excited about the success of their model, they began to analyze the molecule's vibrational motion by breaking it down into its various frequencies. Each frequency being like a note in a chord, the frequencies told researchers how the protons were behaving. However, the frequency of these molecular vibrations is way above the audible range. The two researchers share an interest in music and had collaborated musically before. So when it came time to illustrate the revival, they decided the best way to do it was to scale the frequencies down to 1,000 Hertz, which is in the range at which the human ear hears best. "This way you can listen to the vibrations and hear the revival. In the same way sound is analyzed and decomposed, we decomposed the vibration with regard to the frequencies," Thumm said. Their result, a changing musical chord coupled with a movie illustrating the protons' vibrations can be heard and viewed at http://www.mpg.de/video/FilmundoAudio-KdM.wmv

Thumm said researchers hope to be able to do the same thing for more complex molecules like water or methane. Just as a C Major chord sounds different from a d minor chord, Thumm said other molecules also would have their own unique sound. Thumm and Feuerstein's most recent work was first published last fall in the Physical Review Letters. Their research was supported by the National Science Foundation, the U.S. Department of Energy and the Max-Planck Society. Thumm said such basic research supports the long-term goal of applying lasers to steer chemical reactions. The hope is to largely increase the efficiency of chemical reactions by enhancing desired reaction pathways with lasers, he said.

Adapted from materials provided by Kansas State University.

Read the rest of this entry »

Researchers Create Gold Aluminum, Black Platinum, Blue Silver Using Tabletop Laser

Daily Science Journal (Feb. 2, 2008) — Using a tabletop laser, University of Rochester optical scientists have turned pure aluminum, gold. And blue. And gray. And many other colors. And it works for every metal tested, including platinum, titanium, tungsten, silver, and gold.

Gold Aluminum, Blue Titanium, Gold Platinum. (Credit: Richard Baker, University of Rochester)

Chunlei Guo, the researcher who a year ago used intense laser light to alter the properties of a variety of metals to render them pitch black, has pushed the same process further in a paper in today's Applied Physics Letters. He now believes it's possible to alter the properties of any metal to turn it any color—even multi-colored iridescence like a butterfly's wings.

Since the process changes the intrinsic surface properties of the metal itself and is not just a coating, the color won't fade or peel, says Guo, associate professor of optics at the Institute of Optics at the University of Rochester. He suggests the possibilities are endless—a cycle factory using a single laser to produce bicycles of different colors; etching a full-color photograph of a family into the refrigerator door; or proposing with a gold engagement ring that matches your fiancée's blue eyes.

"Since the discovery of the black metal we've been determined to get full control on getting metals to reflect only a certain color and absorb the rest, and now we finally can make a metal reflect almost any color we wish," says Guo. "When we first found the process that produced a gold color, we couldn't believe it. We worked in the lab until midnight trying to figure out what other colors we could make."

Guo and his assistant, Anatoliy Vorobeyv, use an incredibly brief but incredibly intense laser burst that changes the surface of a metal, forming nanoscale and microscale structures that selectively reflect a certain color to give the appearance of a specific color or combinations of colors.

The metal-coloring research follows up on Guo's breakthrough "black metal" discovery in late 2006, when his research team was able to create nanostructures on metal surfaces that absorbed virtually all light, making something as simple as regular aluminum into one of the darkest materials ever created.

Guo's black metal, with its very high absorption properties, is ideal for any application where capturing light is desirable. The potential applications range from making better solar energy collectors, to more advanced stealth technology, he says. The ultra-brief/ultra-intense light Guo uses is produced by a femtosecond laser, which produces pulses lasting only a few quadrillionths of a second. A femtosecond is to a second what a second is to about 32 million years. During its brief burst, Guo's laser unleashes as much power as the entire electric grid of North America does, all focused onto a spot the size of a needlepoint.

The intense blast forces the surface of the metal to form nanostructures—pits, globules, and strands that response incoming light in different ways depending on the way the laser pulse sculpted the structures. Since the structures are smaller than the wavelength of light, the way they reflect light is highly dependent upon their specific size and shape, says Guo. Varying the laser intensity, pulse length, and number of pulses, allows Guo to control the configuration of the nanostructures, and hence control what color the metal reflects.

Guo and Vorobyev also achieve the iridescent coloring by creating microscale lines covered with nanostructures. The lines, arranged in regular rows, cause reflected light of different wavelengths to interfere differently in different directions. The result is a piece of metal that can appear solid purple from one direction, and gray from another, or multiple colors all at once.

To alter an area of metal the size of a dime currently takes 30 minutes or more, but the researchers are working on refining the technique. Fortunately, despite the incredible intensity involved, the femtosecond laser can be powered by a simple wall outlet, meaning that when the process is refined, implementing it should be relatively simple.

The new process has worked on every metal Guo has tried, and the results are so consistent that he believes it will work for every metal known. His team is currently working to find the right tuning to create the rest of the rainbow for the solid-colored metal, including red and green.

Adapted from materials provided by University of Rochester.

Read the rest of this entry »