Showing posts with label Thermodynamics. Show all posts
Showing posts with label Thermodynamics. Show all posts

Daily Science Journal (Dec. 11, 2007) — The next generation of laptops, desk computers, cell phones and other semiconductor devices may get faster and more cost-effective with research from Clemson University.

Prototype of the semiconductor processing equipment may lead to commercial manufacturing tools for developing future generations of silicon chips. (Credit: Image courtesy of Clemson University)

“We’ve developed a new process and equipment that will lead to a significant reduction in heat generated by silicon chips or microprocessors while speeding up the rate at which information is sent,” says Rajendra Singh, D. Houser Banks Professor and director for the Center for Silicon Nanoelectronics at Clemson University.


The heart of many high-tech devices is the microprocessor that performs the logic functions. These devices produce heat depending on the speed at which the microprocessor operates. Higher speed microprocessors generate more heat than lower speed ones. Presently, dual-core or quad-core microprocessors are packaged as a single product in laptops so that heat is reduced without compromising overall speed of the computing system. The problem, according to Singh, is that writing software for these multicore processors, along with making them profitable, remains a challenge.

“Our new process and equipment improve the performance of the materials produced, resulting in less power lost through leakage. Based on our work, microprocessors can operate faster and cooler. In the future it will be possible to use a smaller number of microprocessors in a single chip since we’ve increased the speed of the individual microprocessors. At the same time, we’ve reduced power loss six-fold to a level never seen before. Heat loss and, therefore, lost power has been a major obstacle in the past,” said Singh.

The researchers say the patented technique has the potential to improve the performance and lower the cost of next-generation computer chips and a number of semiconductor devices, which include green energy conversion devices such as solar cells.

“The potential of this new process and equipment is the low cost of manufacturing, along with better performance, reliability and yield,” Singh said. “The semiconductor industry is currently debating whether to change from smaller (300 mm wafer) manufacturing tools to larger ones that provide more chips (450 mm). Cost is the barrier to change right now. This invention potentially will enable a reduction of many processing steps and will result in a reduction in overall costs.”

Participants in the research included Aarthi Venkateshan, Kelvin F. Poole, James Harriss, Herman Senter, Robert Teague of Clemson and J. Narayan of North Carolina State University at Raleigh. Results were published in Electronics Letters, Oct. 11, 2007, Volume: 43, Issue: 21,
 pages: 1130-1131. The work reported here is covered by a broad-base patent of Singh and Poole issued to Clemson University in 2003.

Adapted from materials provided by Clemson University.



Read the rest of this entry »

Daily Science Journal (Nov. 3, 2007) — Cancer cells treated with carbon nanotubes can be destroyed by non-invasive radio waves that heat up the nanotubes while sparing untreated tissue, a research team led by scientists at The University of Texas M. D. Anderson Cancer Center and Rice University has shown in preclinical experiments.

Researchers show that the technique completely destroyed liver cancer tumors in rabbits. There were no side effects noted. However, some healthy liver tissue within 2-5 millimeters of the tumors sustained heat damage due to nanotube leakage from the tumor.

"These are promising, even exciting, preclinical results in this liver cancer model," says senior author Steven Curley, M.D., professor in M. D. Anderson's Department of Surgical Oncology. "Our next step is to look at ways to more precisely target the nanotubes so they attach to, and are taken up by, cancer cells while avoiding normal tissue."

Targeting the nanotubes solely to cancer cells is the major challenge in advancing the therapy, Curley says. Research is under way to bind the nanotubes to antibodies, peptides or other agents that in turn target molecules expressed on cancer cells. To complicate matters, most such molecules also are expressed in normal tissue.


Curley estimates that a clinical trial is at least three to four years away.

Curley conducted the research at M. D. Anderson in collaboration with nanotechnology experts at Rice University and with Erie, Pennsylvania, entrepreneur John Kanzius of ThermMed LLC, who invented the experimental radiofrequency generator used in the experiments. Kanzius is a cancer survivor and former radio station owner whose insights into the potential of targeted radio waves inspired this line of research.

At Rice, the work was begun by Nobel laureate Richard Smalley, several months before his untimely death from cancer in October 2005. Smalley was the founder of Rice's Carbon Nanotechnology Laboratory and one of the world's foremost experts on carbon nanotubes. He shared the Nobel Prize for the 1985 discovery of fullerenes, the family of carbon molecules that includes nanotubes. His research in 2005 was concentrated largely on the radiofrequency cancer research project.

Rice materials scientist professor Boris Yakobson, Ph.D., a co-author on the paper, recalled meeting with Smalley in his hospital room at M. D. Anderson five days before his death.

"He looked very ill, breathing heavily through the oxygen mask, but all he wanted to do was talk about the physics of this very phenomenon," Yakobson said. "Oblivious of his ebbing health, Rick was focused in the future. He had told Congress in 1999 that nanotechnology would help revolutionize cancer treatment, and he was a scientist wanting to know whether this technology might be one of the things that would make that possible."

In the liver cancer experiment, a solution of single-walled carbon nanotubes was injected directly into the tumors. Four treated rabbits were then exposed to two minutes of radiofrequency treatment, resulting in thermal destruction of their tumors.

Carbon nanotubes are hollow cylinders of pure carbon that measure about a billionth of a meter, or one nanometer, across.

Control group tumors that were treated only by radiofrequency exposure or only by nanotubes were undamaged.

In lab experiments, two lines of liver cancer cells and one pancreatic cancer cell line were destroyed after being incubated with nanotubes and exposed to the radiofrequency field.

"I'm humbled by the results of this research," says Kanzius. "I realize it's early in the race, but Dr. Curley and his team have moved on this carefully with utmost speed. I look forward to continuing to work with them and hopefully to watching the first person be treated with this procedure. The race isn't over but it needs to be taken to the finish line."

Radiofrequency energy fields penetrate deeply into tissue, so it would be possible to deliver heat anywhere in the body if targeted nanotubes or other nanoparticles can be delivered to cancerous cells, Curley says. Without such a target, radio waves will pass harmlessly through the body.

An invasive technique known as radio frequency ablation is used to treat some malignant tumors, the authors note. It requires insertion of needle electrodes directly into the tumors. ncomplete tumor destruction occurs in 5 to 40 percent of cases, normal tissue is damaged and complications arise in 10 percent of patients who suffer such damage. Radiofrequency ablation is limited to liver, kidney, breast, lung and bone cancers.

This research appeared online ahead of December publication in the journal Cancer.

The research was supported by an American Association of Cancer Research Littlefield Grant, NASA and the Houston-based Alliance for NanoHealth, the National Science Foundation, the Center for Biological and Environmental Nanotechnology and the Fulbright Foundation.

Co-authors with Curley, Smalley, Kanzius and Yakobson are first authors Christopher J. Gannon, M.D., also of M. D. Anderson's Department of Surgical Oncology, and Paul Cherukuri, Ph.D. of Rice's Carbon Nanotechnology Laboratory and Department of Chemistry; Carter Kittrell, Ph.D., R. Bruce Weisman, Ph.D., Matteo Pasquali, Ph.D., and Howard K. Schmidt, Ph.D., all of Rice; and Laurent Cognet, Ph.D., of Rice and the Centre de Physique Moléculaire Optique et Hertzienne, Université Bordeaux, France.

Adapted from materials provided by University of Texas M. D. Anderson Cancer Center.



Read the rest of this entry »

Daily Science Journal (Oct. 31, 2007) — Make way for the real nanopod and make room in the Guinness World Records. A team of researchers with the U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) and the University of California at Berkeley have created the first fully functional radio from a single carbon nanotube, which makes it by several orders of magnitude the smallest radio ever made.

This image, taken by a transmission electron microscope, shows a single carbon nanotube protruding from an electrode. This nanotube is less than a micron long and only 10 nanometers wide, or 10,000 times thinner than the width of a single human hair. When a radio wave of a specific frequency impinges on the nanotube, it begins to vibrate vigorously. An electric field applied to the nanotube forces electrons to be emitted from its tip. This electrical current may be used to detect the mechanical vibrations of the nanotube, and thus listen to the radio waves. (The waves shown in this image were added for visual effect, and are not part of the original microscope image.) (Credit: Courtesy Zettl Research Group, Lawrence Berkeley National Laboratory and University of California at Berkeley)

Wielding a single carbon nanotube 10,000 times smaller than a human hair, this is definitely the smallest radio yet. The nanotube vibrates at radio frequencies to receive the signal, then acts as both amplifier and demodulator. With only a battery and sensitive earphones, it can pick up AM or FM. With such a small receiver or transmitter, you could put a tracking collar on a bacterium.


“A single carbon nanotube molecule serves simultaneously as all essential components of a radio — antenna, tunable band-pass filter, amplifier, and demodulator,” said physicist Alex Zettl, who led the invention of the nanotube radio. “Using carrier waves in the commercially relevant 40-400 MHz range and both frequency and amplitude modulation (FM and AM), we were able to demonstrate successful music and voice reception.”

Given that the nanotube radio essentially assembles itself and can be easily tuned to a desired frequency band after fabrication, Zettl believes that nanoradios will be relatively easy to mass-produce. Potential applications, in addition to incredibly tiny radio receivers, include a new generation of wireless communication devices and monitors. Nanotube radio technology could prove especially valuable for biological and medical applications.

“The entire radio would easily fit inside a living cell, and this small size allows it to safely interact with biological systems,” Zettl said. “One can envision interfaces with brain or muscle functions, or radio-controlled devices moving through the bloodstream.”

It is also possible that the nanotube radio could be implanted in the inner ear as an entirely new and discrete way of transmitting information, or as a radically new method of correcting impaired hearing.

Zettl holds joint appointments with Berkeley Lab's Materials Sciences Division (MSD) and the UC Berkeley Physics Department where he is the director of the Center of Integrated Nanomechanical Systems. In recent years, he and his research group have created an astonishing array of devices out of carbon nanotubes - hollow tubular macromolecules only a few nanometers (billionths of a meter) in diameter and typically less than a micron in length – including sensors, diodes and even a motor. The nanotube radio, however, is the first that – literally – rocks!

“When I was a young kid, I got a transistor radio as a gift and it was the greatest thing I could imagine - music coming from a box I could hold in my hand!” Zettl said. “When we first played our nanoradio, I was just as excited as I was when I first turned on that transistor radio as a kid.”

The carbon nanotube radio consists of an individual carbon nanotube mounted to an electrode in close proximity to a counter-electrode, with a DC voltage source, such as from a battery or a solar cell array, connected to the electrodes for power. The applied DC bias creates a negative electrical charge on the tip of the nanotube, sensitizing it to oscillating electric fields. Both the electrodes and nanotube are contained in vacuum, in a geometrical configuration similar to that of a conventional vacuum tube.

Kenneth Jensen, a graduate student in Zettl’s research group, did the actual design and construction of the radio.

“We started out by making an exceptionally sensitive force sensor,” Jensen said.“Nanotubes are like tiny cat whiskers.Small forces, on the order of attonewtons, cause them to deflect a significant amount.By detecting this deflection, you can infer what force was acting on the nanotube. This incredible sensitivity becomes even greater at the nanotube’s flexural resonance frequency, which falls within the frequencies of radio broadcasts, cell phones and GPS broadcasting. Because of this high resonance frequency, Alex (Zettl) suggested that nanotubes could be used to make a radio.”

Although it has the same essential components, the nanotube radio does not work like a conventional radio. Rather than the entirely electrical operation of a conventional radio, the nanotube radio is in part a mechanical operation, with the nanotube itself serving as both antenna and tuner.

Incoming radio waves interact with the nanotube’s electrically charged tip, causing the nanotube to vibrate. These vibrations are only significant when the frequency of the incoming wave coincides with the nanotube’s flexural resonance frequency, which, like a conventional radio, can be tuned during operation to receive only a pre-selected segment, or channel, of the electromagnetic spectrum.

Amplification and demodulation properties arise from the needle-point geometry of carbon nanotubes, which gives them unique field emission properties. By concentrating the electric field of the DC bias voltage applied across the electrodes, the nanotube radio produces a field-emission current that is sensitive to the nanotube’s mechanical vibrations. Since the field-emission current is generated by the external power source, amplification of the radio signal is possible. Furthermore, since field emission is a non-linear process, it also acts to demodulate an AM or FM radio signal, just like the diode used in traditional radios.

“What we see then is that all four essential components of a radio receiver are compactly and efficiently implemented within the vibrating and field-emitting carbon nanotube,” said Zettl. “This is a totally different approach to making a radio - the exploitation of electro-mechanical movement for multiple functions. In other words, our nanotube radio is a true NEMS (nano-electro-mechanical system) device.”

Because carbon nanotubes are so much smaller than the wavelengths of visible light, they cannot be viewed with even the highest powered optical microscope. Therefore, to observe the critical mechanical motionof their nanotube radio, Zettl and his research team, which in addition to Jensen, also included post-doc Jeff Weldon and graduate student Henry Garcia, mounted their nanotube radio inside a high resolution transmission electron microscope (TEM). A sine-wave carrier radio signal was launched from a nearby transmitting antenna and when the frequencies of the transmitted carrier wave matched the nanotube resonance frequency, radio reception became possible.

“To correlate the mechanical motions of the nanotube to an actual radio receiver operation, we launched an FM radio transmission of the song Good Vibrations by the Beach Boys,” said Zettl. “After being received, filtered, amplified, and demodulated all by the nanotube radio, the emerging signal was further amplified by a current preamplifier, sent to an audio loudspeaker and recorded. The nanotube radio faithfully reproduced the audio signal, and the song was easily recognizable by ear.”

When the researchers deliberately detuned the nanotube radio from the carrier frequency, mechanical vibrations faded and radio reception was lost. A “lock” on a given radio transmission channel could be maintained for many minutes at a time, and it was not necessary to operate the nanotube radio inside a TEM. Using a slightly different configuration, the researchers successfully transmitted and received signals across a distance of several meters.

“The integration of all the electronic components of a radio happened naturally in the nanotube itself,” said Jensen. “Within a few hours of figuring out that our force sensor was in fact a radio, we were playing music!”

Added Zettl, “Our nanotube radio is sophisticated and elegant in the physics of its operation, but sheer simplicity in technical design. Everything about it works perfectly, without additional patches or tricks.”

Berkeley Lab’s Technology Transfer Department is now seeking industrial partners to further develop and commercialize this technology.

A paper on this work is now on-line at the Nano Letters Website. It will also be published in the November 2007 print edition of Nano Letters. The paper is entitled “Nanotube Radio” and the co-authors are Zettl, Jensen, Weldon and Garcia. In that same print edition, there appears a paper by Peter Burke and Chris Rutherglen of UC Irvine, reporting on the use of a carbon nanotube as a demodulator.

The nanotube radio research was supported by the U.S. Department of Energy and by the National Science Foundation within the Center of Integrated Nanomechanical Systems.

Berkeley Lab is a U.S. Department of Energy national laboratory located in Berkeley, California. It conducts unclassified scientific research and is managed by the University of California.

Adapted from materials provided by DOE/Lawrence Berkeley National Laboratory.



Read the rest of this entry »